1～12 件を表示 ／ 全 12 件
96CH TTL Digital Input/Output
Features ■ Output port status feedback ■ Port configuration that can be set as input or output ■ High drive capability, up to 48mA (sink) and 15mA (source) ■ 48/96CH digital TTL input/output ■ Supports 32-bit, 5V PCI bus ■ Onboard 8254 timer/counter chip ■ Change of State (COS) interrupt ■ Multiple programmable interrupt sources
High-performance IEEE 488 GPIB interface with 1.5MB/s data transfer.
Features - Supports 32-bit 3.3V/5V PCI bus - Low-profile PCI MD1 form factor - Fully compatible with IEEE 488 standard - Data transfer rate: up to 1.5MB/s - Built-in 2KB FIFO read/write operations - Provides API compatible with NI-488.2* driver software - Supports industrial standard VISA library - Interactive utility for testing and diagnostics
96CH 12Bit 3MS/s simultaneous sampling A/D conversion DAQ card
■32 bit 3.3V or 5V PCI bus (DAQ series) ■PCI Express x1 interface (DAQe series) ■PXI Rev2.2 compliant (PXI series) ■Analog input 96-CH single-ended / 48-CH differential input ■Maximum 3 Ms/s sampling rate ■12 bit A/D resolution ■Analog/digital trigger ■Bus mastering DMA ■Auto calibration ■Multiple card synchronization
8CH 12Bit Isolated D/A Conversion
Features - Supports 32-bit, 5V PCI bus - Isolated 8-CH 12-bit voltage output - 2500VRMS optical isolation - Jumper-selectable bipolar and unipolar output ranges - 4-CH isolated DI, 4-CH isolated DO - Current output version available on PCI-6308A
8CH relay output 16CH isolated digital input
Features - PICMG 2.0 Revision 2.1 - 8-CH SPDT relay - Non-latching relay - Onboard relay drive circuit - Relay output state feedback - 16-CH, isolated DI - Onboard DI low-pass filter processing - 2 external interrupt sources
4-port RS-422/485 serial communication
Features - 32-bit CompactPCI, PICMG2.0 Rev2.1 - Plug and play, IRQ & I/O addresses are automatically assigned by PCI BIOS. - 4 asynchronous communication ports (intelligent buffer) - 4 RS-422/485 ports - 2500 VRMS isolation voltage - Supports multiple operating systems. - Surge protector - Rugged DB37 connector
80MB/s high speed 32CH digital input/output
Features - Supports 32-bit 5V PCI bus - Multiple I/O port configurations: 16-CH DI & 16-CH DO, 32-CH DI or 32-CH DO - Data transfer speed: up to 80Mbytes/s - Bus mastering scatter-gather technology and DMA - Onboard internal timer pacer for clock-driven DIO - Onboard 32K word FIFO - ACK and REQ signals for handshaking data transfer - Recommended for use with system memory less than 4GB
Low-cost 16CH 16Bit maximum 250kS/s simultaneous sampling A/D conversion DAQ card
■32 bit 3.3 V or 5 V PCI bus (DAQ series) ■PCI Express x1 interface (DAQe series) ■16-CH single-ended / 8-CH differential input ■16 bit A/D resolution with a maximum sampling rate of 250kS/second ■Analog/Digital trigger ■2-CH 12bit 1MS/s analog output with waveform generation function (PXI/DAQ/DAQe-2214) ■Bus mastering DMA ■Auto calibration ■Multiple card synchronization
4/8CH 12Bit Maximum 1MS/s D/A Conversion Multi-Function DAQ Card
■32 bit 3.3V or 5V PCI bus (DAQ series) ■PCI Express x1 interface (DAQe series) ■PXI Rev2.2 compliant (PXI series) ■12-bit multiplying D/A resolution ■Maximum continuous update rate of 1 MS/s ■4 CH analog output (PXI/DAQ/DAQe-2501) ■8 CH analog output (PXI/DAQ/DAQe-2502) ■Hardware arbitrary waveform generation ■Onboard 8 K sample D/A FIFO (PXI/DAQ/DAQe-2501) ■Onboard 16 K sample D/A FIFO (PXI/DAQ/DAQe-2502)
4/8 port asynchronous serial communication RS-422/485
Features - PICMG 2.0 Rev 2.1 - 4/8 asynchronous communication ports (intelligent buffer) - 3/4 RS-232 ports and one isolated RS-422/485 port (isolation voltage 2500 VRMS) - TXD/RXD signal line surge protector - Supports two cards per system - Robust DB-37 connector (cPCI-3534) - Robust DB-62 connector (cPCI-3538) - Available rear I/O on cPCI-3534R/cPCI-3538R
64-CH 12/16Bit Maximum 3MS/s A/D Conversion DAQ Card
■32 bit 3.3V or 5V PCI bus (DAQ series) ■PCI Express x1 interface (DAQe series) ■Compliant with PXI Rev2.2 (PXI series) ■64-CH single-ended / 32-CH differential analog input ■Maximum 3 MS/s sampling rate (PXI/DAQ/DAQe-2204) ■12-bit A/D resolution (PXI/DAQ/DAQe-2204) ■16-bit A/D resolution (PXI/DAQ/DAQe-2206, PXI/DAQ/DAQe-2205) ■Onboard 1K sample A/D FIFO ■Analog input range bipolar/unipolar ■Programmable gain x1, x2, x4, x5, x8, x10, x20, x40, x50, x200 (PXI/DAQ/DAQe-2204) x1, x2, x4, x8 (PXI/DAQ/DAQe-2206 & PXI/DAQ/DAQe-2205)
64-CH 12/16Bit Maximum 3MS/s A/D Conversion DAQ Card
■32 bit 3.3V or 5V PCI bus (DAQ series) ■PCI Express x1 interface (DAQe series) ■Compliant with PXI Rev2.2 (PXI series) ■64-CH single-ended / 32-CH differential analog input ■Maximum 3 MS/s sampling rate (PXI/DAQ/DAQe-2204) ■12-bit A/D resolution (PXI/DAQ/DAQe-2204) ■16-bit A/D resolution (PXI/DAQ/DAQe-2206, PXI/DAQ/DAQe-2205) ■Onboard 1K sample A/D FIFO ■Analog input range bipolar/unipolar ■Programmable gain x1, x2, x4, x5, x8, x10, x20, x40, x50, x200 (PXI/DAQ/DAQe-2204) x1, x2, x4, x8 (PXI/DAQ/DAQe-2206 & PXI/DAQ/DAQe-2205)
